BOUNDARY DETECTOR-ATSS
Boundary Detector that covers a building’s perimeter,Boundary Detector long, narrow detection area comes from the center point, covering both sides. Boundary Detector creates a multi-layered,horizontal barrier that detects intruders and sounds the alarm before they actually break in.Just one boundary detector can protect a long area,because it is installed in the center of the detection area and protects on both sides. makes you feel secure in knowing your building is well guarded.
- Description
- Additional information
- Global Tab
Description
Boundary Detector that covers a building’s perimeter,Boundary Detector long, narrow detection area comes from the center point, covering both sides. Boundary Detector creates a multi-layered,horizontal barrier that detects intruders and sounds the alarm before they actually break in.Just one boundary detector can protect a long area,because it is installed in the center of the detection area and protects on both sides. makes you feel secure in knowing your building is well guarded.
Additional information
| Weight | 0.23 kg |
|---|---|
| Dimensions | 12 × 22 × 123 cm |
Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Vestibulum tortor quam, feugiat vitae, ultricies eget, tempor sit amet, ante. Donec eu libero sit amet quam egestas semper. Aenean ultricies mi vitae est. Mauris placerat eleifend leo.
Donec sed tincidunt lacus. Duis vehicula aliquam vestibulum. Aenean at mollis mi. Cras ac urna sed nisi auctor venenatis ut id sapien. Vivamus commodo lacus lorem, a tristique sapien tempus non. Donec fringilla cursus porttitor. Morbi quis massa id mi pellentesque placerat. Nam scelerisque sit amet diam id blandit. Nullam ultrices ligula at ligula tincidunt, sit amet aliquet mi pellentesque. Aenean eget fermentum risus. Aenean eu ultricies nulla, id bibendum libero. Vestibulum dui augue, malesuada nec tellus vel, egestas condimentum ipsum. Vestibulum ut.
Related Products
-
ARN3662_HD/FHD
-
Fingerprint Time & Attendance Recorder
-
ATSS LARGE HOOTER
Siren/Hooter connect to the control panel to raise an alarm to threaten the intruder run away.
The External Siren installed and wired to the Control Panel will activate in the event of an intrusion with the system armed. In the event of the cable to the Siren Unit being deliberately cut an alarm will be generated at the control panel, provided that the tamper circuit to the Siren has been connected.
Siren should be located as high as possible in a prominent position so that it can be easily seen and heard. When running the cable to the siren, the cable should pass through a hole in the external wall and enter through the rear of the casing.
Sounds generated by the system can be made different for various system alarms. In addition, the type of sound can help to scare away an intruder or evacuate the building during a fire.
During a burglary the siren’s sound is startling, but more effectively, filling the room with sound blocks the intruder’s ability to hear police sirens approaching. This lack of ability to hear into the distance raises the panic level of an intruder most likely making them want to leave. Consider outfitting the system with indoor sounders to fill the room with noise and outdoor sirens to call for the immediate attention of neighbours.
-
ATSS BURGLAR ALARM ACTIVE 207
-
ATSS BURGLAR ALARM ACTIVE 108
-
Biometric + RFID Attendance System
-
2 Fingerprint Reader Connectivity
-
BEAM SENSOR-ATSS
Photoelectric beam systems detect the presence of an intruder by transmitting visible or infra red light beams across an area, where these beams maybe obstructed. To improve the detection surface area, the beams are often employed in stacks of two or more. However, if an intruder is aware of the technology’s presence, it can be avoided.
The technology can be an effective long-range detection system, if installed in stacks of three or more where the transmitters and receivers are staggered to create a fence-like barrier. Systems are available for both internal and external applications. To prevent a clandestine attack using a secondary light source being used to hold the detector in a ‘sealed’ condition whilst an intruder passes through, most systems use and detect a modulated light source.
-
Biometric + RFID Attendance System
-
HUNTER X4 – Security Alarm System
The HunterX8 is a state-of-the-art electronic security system with advanced features and easy to use functionlity. The companian Android app interfaces with the system providing remote operation from anywhere.
Key Features
- 4 Zone Intrusion GSM Alarm Control System
- Instant Siren and Call / SMS Alert for Opened Zones
- Custom Pre-recorded Voice & Text Alert Messages
- 5 Individual users can be assigned
- Onboard Keypad with LCD Display
- Android Smart App for easy control
- Arm / Disarm by calling from assigned mobile phones with optional
- Password protection through Android App
- Resettable Password
- Zone Status indications on display
- Memory to store 5 phone numbers
- Sends SMS on Arm/ Disarm with User Info
- Mobile Prepaid Balance status information
- If network is not available, system operates as Normal Panel
- Fully re-programmable for future options
- Loud Siren with Siren Delay Timer & option to
- Switch On or Off
- Built In battery backup
- Low battery indication by SMS
- Resettable fuse
- Tamper information by SMS
